← All openings

Opening · Assembly and final testing

Quality Engineer – Assembly & Final Testing

Check every motor as it is built and release only the ones that pass our final tests.

Apply for this roleSee all openings

About the role

Our own line winds the stators, bonds and inserts the magnets, balances the rotors and assembles every motor. You make sure each step is done right and that every finished motor is tested before it leaves.

You will run in-process inspection on the line and the stator and final motor tests on our test bench, and turn what the data shows into fixes with the production team.

What you will do

  • Inspect in process at winding, varnishing, magnet bonding, rotor balancing and assembly.
  • Run stator tests and final motor tests on the test bench, and record the results.
  • Approve first-off and last-off parts for each batch.
  • Release finished units and keep serial-number traceability.
  • Analyse rejections, find the root cause and close corrective actions with production.
  • Write and update check sheets and work instructions for the line.
  • Investigate field returns with the R&D team.

What you bring

Must have

  • Diploma or BE / BTech in Electrical (EEE), Electronics (ECE), Mechatronics or Mechanical Engineering.
  • 0 to 4 years of experience. Freshers are welcome.
  • Understands motors and basic electrical measurements: resistance, insulation, current and voltage.
  • Careful with records and comfortable with Excel.

Good to have

  • Line or final-inspection experience in a motor, electrical or automotive plant.
  • Hands-on work with BLDC motors, drones or test benches.
  • Knowledge of 7 QC tools, root-cause analysis and 8D.

Where this role leads

Each step comes with more ownership. You move up by what you take on and deliver, not by time served.

  1. Quality EngineerRun line inspection and final tests for a shift.
  2. Senior Quality EngineerOwn the test bench, test limits and the process quality data.
  3. Quality LeadLead inward, line and final quality for the plant.
  4. Quality ManagerOwn the quality system and customer quality.

How we hire

The same steps for every candidate, so every application is judged on the work.

  1. Apply onlineSend the form below with a link to your resume.
  2. Written technical testMotors, electrical measurement and quality basics.
  3. Practical roundTest a motor on the bench and explain the result.
  4. Scenario roundHow you stop a bad batch without stopping the line for long.
  5. Final interviewMeet the team. The selected candidate gets an offer letter.

Apply for this role

Fill in your details and paste a link to your resume. Your application goes straight to the Taraxis hiring team.

If your profile fits, we call you to fix a date for the written test and interview.

Questions · siddharth@taraxismotor.com